BICHENGPCBBicheng Technologies Limited

面向射频的先进 8 层 HDI 电路板方案,采用 RO4350B 芯板与 RO4450F 粘接片

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

1.Introduction to Our Premium RF PCB Technology

At the forefront of high-frequency PCB innovation, our 8-layer HDI RF printed circuit board combines Rogers RO4350B high-frequency laminate with RO4450F bondply to deliver exceptional performance for demanding RF applications. This advanced PCB solution is engineered for 5G infrastructure, automotive radar systems, satellite communications, and RF identification technologies.

Superior high-frequency performance with dielectric constant (Dk) of 3.48±0.05 at 10GHz Ultra-low signal loss (dissipation factor of 0.0037 at 10GHz) Excellent thermal management (0.69 W/m/K conductivity) Outstanding dimensional stability (CTE: X=10, Y=12, Z=32 ppm/°C) High temperature resistance (>280°C Tg) Cost-effective alternative to traditional PTFE materials UL 94 V-0 flammability rating for safety-critical applications

Optimized for multilayer RF designs (Dk: 3.52±0.05 at 10GHz) Enhanced lamination capability (0.004 dissipation factor) Superior thermal performance (0.65 W/m/K conductivity) Excellent CTE characteristics (X=19, Y=17, Z=50 ppm/°C) Compatible with sequential lamination processes Improved flow characteristics for void-free construction

50 ohm on GTL 9.4 mil, reference layer 2

50 ohm on L2 7 mil, reference layer GTL, L3/GND

50 ohm on L7 7 mil, reference layer L6/PWR, L8/GBL

50 ohm on GBL 9.4 mil, reference layer L7/GND

Our carefully engineered 8-layer stackup delivers maximum performance:

Component Density: 76 total components Pad Configuration: Total pads: 303 Thru-hole pads: 117 SMT pads: 186 (121 top, 65 bottom) Via Count: 335 vias Net Count: 6 nets

Artwork Format: Gerber RS-274-XQuality Standard: IPC-Class-2 compliantAvailability: Worldwide production and shipping

5G Infrastructure: Base station antennas and power amplifiers Automotive Electronics: Radar systems and sensors Aerospace & Defense: Satellite communication LNBs RFID Systems: High-performance identification tags Microwave Systems: Direct broadcast satellite components

1.Superior Signal Integrity: Tight impedance control and low-loss materials 2.Enhanced Reliability: Robust construction with resin-filled vias 3.Thermal Performance: Excellent heat dissipation characteristics 4.Manufacturing Consistency: Strict IPC-Class-2 quality standards 5.Technical Support: Expert guidance for your specific application needs

This high-performance RF PCB solution represents the perfect combination of advanced materials science and precision engineering, delivering the exceptional quality needed for today's most demanding high-frequency applications. Contact our technical team today to discuss how this technology can benefit your next RF project.

规格参数

AttributeDetails
Base MaterialRO4350B
Layer Count8 layers
Board Dimensions96.4 mm x 163.9 mm (± 0.15 mm)
Minimum Trace/Space4/6 mils
Minimum Hole Size0.4 mm
Blind ViasGTL-L7, L3-GBL, GTL-L2, L7-GBL, GTL-L3, GTL-L4, GTL-L5, L5-GBL, L4-GBL, GTL-L6, L6-GBL, L2-GBL, mechanical drill
Finished Board Thickness1.8 mm
Finished Copper WeightOuter layers: 1 oz (1.4 mils) Inner layers: 1 oz (1.4 mil) / 0.5 oz (0.7 mil)
Via Plating Thickness20 μm
表面处理Electroless Nickel Immersion Gold
Top SilkscreenWhite
Bottom SilkscreenWhite
Top Solder MaskGreen
Bottom Solder MaskGreen
Via TreatmentAll vias resin filled and capped
Quality Assurance100% Electrical test prior to shipment
Impedance Control50 ohm on GTL 9.4 mil, reference layer 250 ohm on L2 7 mil, reference layer GTL, L3/GND50 ohm on L7 7 mil, reference layer L6/PWR, L8/GBL50 ohm on GBL 9.4 mil, reference layer L7/GND

层叠结构

  1. Layer 1 · Copper + plating · 17 μmcopper
  2. Core 1 · Rogers RO4350B · 0.168 mm (6.6 mil)core
  3. Layer 2 · Copper · 17 μmcopper
  4. Bondply 1 · RO4450F · 8 milcore
  5. Layer 3 · Copper · 35 μmcopper
  6. Core 2 · Rogers RO4350B · 0.127 mm (5 mil)core
  7. Layer 4 · Copper · 17 μmcopper
  8. Bondply 2 · RO4450F · 20 milcore
  9. Layer 5 · Copper · 17 μmcopper
  10. Core 3 · Rogers RO4350B · 0.127 mm (5 mil)core
  11. Layer 6 · Copper · 35 μmcopper
  12. Bondply 3 · RO4450F · 8 milcore
  13. Layer 7 · Copper · 17 μmcopper
  14. Core 4 · Rogers RO4350B · 0.168 mm (6.6 mil)core
  15. Layer 8 · Copper + plating · 17 μmcopper

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com