材料数据表
Rogers DiClad 880
24 项参数,来自厂家数据表。数值仅供参考,以下单确认的规格为准。
参数表
| Property | Typical Value | Units | Test Conditions | Test Method |
|---|---|---|---|---|
| Dielectric Constant @10 GHz | 2.17, 2.20 | – | 23°C @ 50% RH | IPC TM-650 2.5.5.5 |
| Dielectric Constant @1 MHz | 2.17, 2.20 | – | 23°C @ 50% RH | IPC TM-650 2.5.5.3 |
| Dissipation Factor @10 GHz | 0.0009 | – | 23°C @ 50% RH | IPC TM-650 2.5.5.5 |
| Dissipation Factor @1 MHz | 0.0008 | – | 23°C @ 50% RH | IPC TM-650 2.5.5.3 |
| Thermal Coefficient of Dk | –160 | ppm/°C | –10°C to 140°C, 10 GHz | IPC TM-650 2.5.5.5 |
| Volume Resistivity | 1.4×10⁹ | MΩ·cm | C96/35/90 | IPC TM-650 2.5.17.1 |
| Surface Resistivity | 2.9×10⁶ | MΩ | C96/35/90 | IPC TM-650 2.5.17.1 |
| Dielectric Breakdown | >45 | kV | D48/50 | ASTM D-149 |
| Arc Resistance | >180 | sec | – | ASTM D-495 |
| CTE – X Direction | 25 | ppm/°C | 50°C to 150°C | IPC TM-650 2.4.41 |
| CTE – Y Direction | 34 | ppm/°C | 50°C to 150°C | IPC TM-650 2.4.41 |
| CTE – Z Direction | 252 | ppm/°C | 50°C to 150°C | IPC TM-650 2.4.24 |
| Thermal Conductivity | 0.25 | W/(m·K) | – | ASTM E1461 |
| Copper Peel Strength | 14 | lbs/in | 10s @ 288°C, 35 μm foil | IPC TM-650 2.4.8 |
| Young's Modulus | 267, 202 | kpsi | 23°C @ 50% RH | ASTM D-638 |
| Tensile Strength (MD, CMD) | 8.1, 7.5 | kpsi | 23°C @ 50% RH | ASTM D-882 |
| Compressive Modulus | 237 | kpsi | 23°C @ 50% RH | ASTM D-695 |
| Flexural Modulus | 357 | kpsi | 23°C @ 50% RH | ASTM D-3039 |
| Flammability | V-0 | – | C48/23/50 & C168/70 | UL 94 |
| Moisture Absorption | 0.02 | % | E1/105 + D24/23 | IPC TM-650 2.6.2.2 |
| Density | 2.23 | g/cm³ | C24/23/50, Method A | ASTM D792 |
| Outgassing – Total Mass Loss | 0.01 | % | 125°C, ≤ 10⁻⁶ torr | NASA SP-R-0022A |
| Outgassing – Collected Volatiles | 0.01 | % | 125°C, ≤ 10⁻⁶ torr | NASA SP-R-0022A |
| Outgassing – Water Vapor Recovered | 0.00 | % | 125°C, ≤ 10⁻⁶ torr | NASA SP-R-0022A |

