BICHENGPCBBicheng Technologies Limited
全部文章

Rogers AD250C 高频电路板 — 面向 5G 与无线应用的低 PIM 天线材料

发布于 2025-08-15

Introduction to AD250C High Frequency PCB

Rogers AD250C antenna laminates are high-performance materials engineered for modern wireless antenna applications. These PTFE-based, glass-reinforced laminates deliver controlled dielectric constant, low loss, and superior passive intermodulation (PIM) performance. The woven glass reinforcement improves circuit processability, supporting high-yield PCB manufacturing. Available with standard ED or reverse-treated ED copper foil, AD250C helps minimize circuit loss and enhance PIM performance.

/

Key Features of AD250C PCB

Extremely low loss tangent of 0.0013 at 10 GHz

Dielectric constant of 2.50 ±0.04 for precise signal control

Low-profile copper reduces conductive loss

Moisture absorption of only 0.04% for environmental stability

High copper peel strength of 14.8 lbs/in for improved durability

/

PCB Manufacturing Capabilities

We support single-sided, double-sided, multilayer, and hybrid PCBs using AD250C material. Standard thicknesses include 20 mil, 30 mil, and 60 mil. Finished copper weights of 1 oz and 2 oz are available. Maximum board size is 400mm x 500mm. Solder mask colors include green, black, blue, red, and yellow. Surface finish options: ENIG, HASL, immersion silver, immersion tin, OSP, ENEPIG, bare copper, and pure gold.

/

Applications

AD250C PCBs are ideal for:

Cellular base station antennas

Automotive telematics antenna systems

Commercial satellite radio antennas